Full Length Mirror in Cream and Gold Carved Teak with Arched Top

A mirror this size that leans against a wall needs one thing that nobody thinks about until it matters: it must not be able to slide.

Leaning is how most large mirrors are used now, and it looks effortless. Mechanically it is a tall, heavy object standing on two small points of contact with the floor, resting on two more against the wall. It is stable while nothing disturbs it - and a leaning mirror is exactly the kind of thing children, pets and vacuum cleaners disturb.

So every full length mirror we make is supplied with a wall restraint: a strap fixed to a batten on the back of the frame and anchored into the wall behind. It allows the mirror to sit at its leaning angle exactly as it looks, and it makes sliding at the base impossible.

The back of the frame is built with that in mind - a solid rail across the upper back, positioned to take the anchor, rather than leaving it to be screwed into whatever happens to be there.

The same rail carries the hanging fixings if you would rather put it on the wall instead.

Material: solid teak in the frame, crest, corner scrolls and back rail.

Shape: arched top with straight sides.

Carving: gilded shell crest with foliate scrolls, carved gilt scrolls at both lower corners, beaded moulding around the inner edge.

Glass: full length mirror plate.

Back: solid rail across the upper back carrying both the wall restraint anchor and the hanging fixings.

Supplied: with wall restraint strap and fixings, for leaning or hanging.

Finish: cream ground with gold applied by hand to the carved work.

Made to order: height, width, frame profile, crest design and finish are all customisable. Custom sizes made to order - final measurements confirmed in writing before production.

A full length mirror plate is the single most vulnerable item we ship, and it is packed accordingly.

The plate is taped in a grid across its entire face so that an impact anywhere cannot spread across the glass, then faced with foam and a rigid board.

The frame is wrapped in acid-free tissue directly against the cream and gold finish, then foam sheet, then bubble wrap, with foam blocking moulded around the shell crest and both corner scrolls - the three points that project beyond the frame line.

The whole mirror travels flat rather than upright, in a hardwood crate with corner protection at every arris, clearly marked for orientation.

The restraint strap and fixings are packed in a labelled bag taped to the back of the frame.

Multi-layer protective packaging is included on every order at no extra cost.

Delivery is free anywhere in India, with guaranteed dent-free arrival. No distance charge, no size charge and no handling fee.

Production begins once your dimensions are confirmed in writing - and for a full length mirror we ask the ceiling height of the room as well as the wall width, since the arch adds height above the glass.

We photograph your actual mirror through the build: the frame in the white, the carving, the cream finish, the gilding and the finished mirror.

On site, our team unpacks the mirror flat, lifts it into position, and fits the wall restraint before leaving - whether it is leaning or hung.

Send us lift dimensions, stair turns and doorway widths ahead of dispatch so the route can be planned. Every photograph on this page is of the actual product, not a render.

The solid teak frame and joinery carry a 20-year warranty - the frame members, the arched head, the crest and the back rail, along with every joint between them.

A lifetime warranty against termite damage runs with the mirror and never expires. Teak's own oils protect the timber from within and our warranty stands behind that.

The mirror plate and the fixings are covered against manufacturing defect.

The cream and gold finish is applied by hand and recorded against your order number, so a matching second mirror - or a matching console or dressing table - can be finished to the same record later. Contact us with your order number and we will arrange it.